The public IPv4 and IPv6 addresses, with their uplink, lead the card.
Every other check is a tile with a plain-word status, the raw setting
and, when it fails, what is wrong. The header counts passing or failing
checks.
A full-access token could create a user or reset a password, sign in as
that user and so reach backups and two-step sign-in settings. Users,
passwords, API tokens and the sign-in rules in PATCH /settings now need
a signed-in user again. /auth/me no longer returns tokenId, and
/settings no longer returns adminUsername.
Bitwarden moves elements around in <body>. A moved dialog stayed open but
fell out of the top layer to the bottom of the page, so the Decoy
confirmation seemed to vanish and the checkbox stayed ticked unsaved.
Every argon2 run takes 64 MiB and nothing limited how many ran at once,
so parallel sign-in attempts could run the server out of memory (8 at
once used about 600 MB). At most two now run at once; at most 16
sign-ins wait for one, more get HTTP 429. 30 parallel sign-ins peaked
at 275 MB.
A sign-in attempt now counts toward the lockout before its password is
checked, so parallel attempts cannot get past it; a right password
takes its own attempt back. IPv6 addresses are locked out by /64.
With net.ipv6.conf.all.forwarding=1, Linux ignores router announcements
unless accept_ra is 2, so a server that gets its IPv6 route by SLAAC
(e.g. a Raspberry Pi at home) lost IPv6 once the route expired.
The sysctl file now also sets accept_ra=2 for the default and for every
network card and the IPv6 default-route interface, except where
accept_ra is 0. "update" rewrites the file, which fixes existing
installs. A new health check warns while the uplink still has
accept_ra=1.
Beside the page, the sidebar now stays in place while the page scrolls,
so the account link and Sign out are always visible; it scrolls by
itself in very short windows. On a phone it still stacks above the page.
Also show the version with one 'v': release builds already start with it.
Seven pages captured from a demo instance with sample data from the
simulator: dashboard (under the introduction), peers, peer, server,
settings, my account and sign-in. Images live in screenshots/.
The signed-in user's profile, password and own app tokens move from the
Settings card to their own page at #/account, ready for more user
functions. The sidebar footer links to it with the user's name. Users
can now set their own note; the page header shows when and from where
the session started, which the server now records. Settings keeps the
Users table, where your own row links to My account.
The single admin account becomes a list of users; config.json moves to
version 2 and the old admin is migrated on first start. Every user is an
admin. Sessions are tied to a user and their password, so deleting a user
or resetting a password signs them out at once. API tokens belong to the
user who made them and go away with that user.
Admins add users with a temporary password and choose whether it must be
changed at first sign-in; until then the API refuses everything but the
password change. Settings gets My account and Users cards, and the token
table shows each token's owner. 'GHOSTWIRE passwd [username]' resets any
user's password. A failed update now also restores config.json, since the
new version may have upgraded it.
Replace the Kamon ghost with the horned Hannya mask in favicon.svg,
apple-touch-icon.png, the web UI and the setup page. The wordmark and
katakana use Shippori Mincho B1 ExtraBold, bundled as a subset (ASCII
and katakana, 21 KB) under the SIL OFL and served from the binary.
The server pings a peer's tunnel address every 30 s and shows the median
of the last 5 minutes in the peer list (with a 1-hour sparkline) and a
24-hour chart on the peer page. Off by default; "active" pings only
while the device sends traffic, "always" keeps the tunnel up.
The uplink check only reported the IPv4 default route. Split it into
IPv4 and IPv6 uplink rows, and add a public address row for each, read
from the uplink interface (private addresses are shown as behind NAT).
In a terminal, install now asks for the domain, Let's Encrypt email,
endpoint, WireGuard port and admin password, shows a summary and changes
nothing until confirmed. Re-runs offer the current settings and say how
many devices need a new config when the endpoint or port changes.
Flags still work and skip their question; -y or no terminal skips all
questions. New -port flag sets the WireGuard UDP port. Every value is
checked before the system is touched.
Add peer and Issue new config offer the same choice as the web UI: show
the config now or send a one-time setup link (1 h, 24 h or 7 d, PIN on by
default). The link sheet shares the link through the iOS share sheet and
shows the PIN, expiry and a QR code of the link. The peer page gets a
setup link card with share, copy and revoke.
A config can now be handed over as a one-time link, valid for 1 h, 24 h or
7 days and protected by a PIN by default. Keys are made only when the link
is opened; the link works once and is revoked after 5 wrong PINs. Issuing a
new config offers the same choice, and the current config keeps working
until the link is used.
Remove the option to paste a client's public key, in the web UI, the API
and the iOS app.
- The stats sampler records sessions per peer: start, end, address and
traffic. A session ends when the peer goes quiet or is disabled; a new
one starts when the device changes networks. Stored in stats.json and
kept as long as the daily traffic history (max 1000 per peer).
- Country and network operator come from the free DB-IP Lite databases
(CC BY 4.0), downloaded monthly and looked up locally, so peer
addresses never leave the server. Settings → Data retention can switch
this off, which deletes the databases.
- API: GET /peers/{id}/sessions; peer stats include the current location;
settings include the database status.
- Web UI and iOS app: connection history card, location line, country
code in the peer list (web), switch in data retention.
Claude-Session: https://claude.ai/code/session_01RAnLbyQZ5ZTA7KqwXP98nw
iOS app (ios/, SwiftUI, iOS 17+) in the web UI's styling with the Kamon
logo. It covers everything the web interface does except password, API
tokens and backups: dashboard, peers with search and filter, peer detail
with traffic charts, add/edit peers, one-time config with QR code and
share sheet, server settings with apply bar, app settings, data
retention and log viewer.
- Pairing by QR code or pasted pairing code; token kept in the keychain;
self-signed certificates are pinned by SHA-256 fingerprint.
- Colour providers and logo drawing are nonisolated: SwiftUI's background
renderer calls them, and main-actor closures crashed there when the
camera scanner was open.
- App Store: version 1.0, export compliance, privacy manifest, app icon,
release.sh (archive and upload), listing text, review notes and 6.9"
screenshots in ios/AppStore.
Server:
- Full-access API tokens may use settings, logs and restart; password,
tokens, backup/restore and the admin username stay admin-only.
- Web pairing dialog gains "Copy pairing code".
- The development simulator reports health checks in Linux wording.
Claude-Session: https://claude.ai/code/session_01RAnLbyQZ5ZTA7KqwXP98nw
- Settings → Data retention: log file size, number of old log files,
hourly and daily traffic history. Stored as log and stats in
config.json, validated, and applied without a restart; lowering a
limit deletes older log files and history after confirmation.
- Traffic history is now pruned by time instead of by bucket count.
- Server page DNS provider list offers only Quad9 and Custom.
Claude-Session: https://claude.ai/code/session_01RAnLbyQZ5ZTA7KqwXP98nw
- Kamon logo (crest ring around the ghost) as favicon.svg, 180 px
apple-touch-icon.png and the brand lockup in sidebar and login page,
with the katakana reading ゴーストワイヤー
- /favicon.ico redirects to /favicon.svg
- Client configs no longer set an MTU; each device picks its own, as
pivpn does. Server MTU changes no longer require reissued configs.
- Fix "null" rendered on the dashboard, wrapping activity times, and show
log lines as readable text instead of raw JSON
Claude-Session: https://claude.ai/code/session_01RAnLbyQZ5ZTA7KqwXP98nw
Single Go binary that manages a WireGuard server based on pivpn's defaults:
- config.json as the single source of truth, reconciled to the kernel via
netlink, wgctrl and its own nftables table (NAT, forward, input)
- web interface (dashboard, peers, peer detail, add peer, server, settings)
and a JSON API for the future iOS app, with session and API-token auth
- client private keys are never stored; configs and QR codes shown once
- per-peer traffic statistics in stats.json, logs in GHOSTWIRE.jsonl
- HTTPS via Let's Encrypt, self-signed, certificate files or off
- self-managing: install, update (restores the old binary on failure),
uninstall and passwd subcommands; systemd unit generated by the binary
Tested end to end on Ubuntu 26.04 (kernel 7.0) at dev.redetzke.aero.
Claude-Session: https://claude.ai/code/session_01RAnLbyQZ5ZTA7KqwXP98nw
Daniel Redetzke